RSC Case Packers
Your product is placed into the case exactly how you want it presented, then sealed and discharged.
Packing your cases
Placed with precision, sealed with certainty.
An RSC case packer erects a regular slotted container from a flat pre-glued blank, loads product into it — usually by robotic pick-and-place — and seals it, all in one integrated machine.
Blanks are drawn from the magazine and erected, bottom flaps folded and sealed, and the case indexed into position while the collation system forms the product into the required configuration.
Product is then placed rather than dropped, with the cycle repeating where the case needs multiple layers, before top flaps are folded, sealed and compressed.
RSC is the right platform when presentation inside the case matters, when the pack must be placed rather than wrapped, or when you’re staying with your existing carton supply.
-
Erects, loads and seals in one integrated machine, at up to 25 cases per minute
-
Top, side and end load are all configurations we build — loading orientation is a design choice, not a fixed feature
-
Robotic pick-and-place places product rather than dropping it, so fragile, flexible and shingled presentations all work
-
Multi-layer cases with layer pads or slip sheets between layers, and double-wall or export board where you need it
-
Hot melt or tape sealing, top and bottom, to suit your site standard
APPLICATIONS
-
Flexible packs
- Pouches & doypacks · retort pouches
- Chub packs
- Chip & vegetable chip bags
-
Tubs, jars & bottles
- Dip pots & honey tubs
- Jars · bottles
- Cosmetics
-
Cartons & dry foods
- Inner cartons · bag-in-box
- Muesli bar cartons · single-serve cereal
- Noodles · biscuits & cakes
-
Chilled & specialty
- Bags of cheese
- Poultry
What makes our solutions different
-
Award-winning expertise
-
Robust engineering
-
On-site & 24/7 remote support
-
Australian made
KEY STATS
| Specification | Standard |
|---|---|
| Typical output | Up to 25 cases/min |
| Case size range | Around 100 × 60 × 60 mm minimum to 1,000 × 600 × 500 mm maximum |
| Board | E, B and C flute including recycled content, to AS3537; double-wall and export board built to order |
| Loading | Top, side and end load; robotic pick-and-place, ABB standard, built to your site robot standard |
| Sealing | Hot melt (Nordson) standard, or adhesive tape top and bottom |
| Magazine | Around 150 cases on a standard erector, extendable to your required run time |
| Changeover | Recipe-driven from the HMI, with tool-less change parts and robot end-of-arm tooling swap |
| Construction | 304 stainless wipe-down frame, anodised aluminium chassis, nickel-plated chain, UHMWPE tracks, no continuous lubrication |
| Controls | Allen Bradley CompactLogix / ControlLogix, PanelView, PowerFlex 525, SEW Eurodrive, IFM sensors |
| Power / air | 415V AC 3-phase 50Hz + N + E, 32A · 6 bar, 350 L/min, 3 micron, 5°C dew point |
| Safety & standards | Category 3 minimum · AS4024.1 guarding · AS3000 wiring · light curtain with documented bypass procedure |
